|
Fi-Clor Chlorine & Bromine Reducer 2.5kg Container
FICBR
Fi-Clor Chlorine/Bromine Reducer
neutralises high levels of chlorine or bromine in pool or spa water.
Ideal treatment when chlorine or bromine levels are higher than
recommended for bathing, and there is insufficient time for them to
fall naturally.
Instructions
- Accurately measure the free available chlorine level or available bromine and
calculate the
- amount of sanitiser that needs to be reduced
- For pools on chlorine, the dose rate is 7 grams of Fi-Clor Chlorine/Bromine
Reducer per 1m3 of water for every 1ppm (mg/l) of chlorine to be reduced.
- For the
average sized home pool of 50m3 (11,000 gallons), 350g of the product will reduce
the chlorine level by 1ppm (mg/l).
- For pools on bromine, the dose rate is 3 grams of Fi-Clor Chlorine/Bromine
Reducer per 1m3 of water for every 1ppm (mg/l) of bromine to be reduced.
- For the
average sized home pool of 50m3 (11,000 gallons), 150g of the product will reduce
the bromine level by 1ppm (mg/l).
- For best results, pre-dissolve in a clean plastic pail and distribute the
product evenly around the pool.
- Wait for at least 2 hours before re-testing, making further additions if required.
Under-dose rather than over-dose, as this can produce an unwanted
chlorine/ bromine demand.
Caution
Never mix in their solid state, or in concentrated solution, Fi-Clor BLUE and RED label products.
For more information please follow the link below
Product Brochure
http://www.certikin.co.uk/pdf/Fi-Clor-swimpool-handbook-2007-low-res.pdf
|
